Skip to main content

10 Great NotePad Tricks To Scare Your Friends

Most of you must be aware about a tool called notepad. It is a simple text based editor. But today I am going to discuss some cool tricks which you can perform on your computer using notepad. You can also use these tricks to scare your friends.




1.Cycle a message in your friend’s computer.
Type :
@ECHO off
:Begin
msg * Hi
msg * Are you having fun?
msg * I am!
msg * Lets have fun together!
msg * Because you have been o-w-n-e-d
GOTO BEGIN
Save it and...
as pc.bat and send it to your friends.

2.Make Keyboard Keys Type Continuously:
Type :
MsgBox “stop me..! if you can”
Set wshShell =wscript.CreateObject(“WScript.Shell”)
do
wscript.sleep 100
wshshell.sendkeys “{bs}”
loop
Save it as pc.vbs and send it to your friends.

3.Convey your friend a message and shut down his/ her computer.
Type :
@echo off
msg * I don’t like you
shutdown -c “Hahahah You are Doomed” -s
Save it as pc.bat and send it to your friends.

4.Toggle your friend’s Caps Lock button simultaneously
Type :
Set wshShell =wscript.CreateObject(“WScript.Shell”)
do
wscript.sleep 100
wshshell.sendkeys “{CAPSLOCK}”
loop
Save it as pc.vbs and send it to your friends.

5.Frustrate your friend by making their keyboard hit Enter simultaneously whenever they press a key :
Type :
Set wshShell = wscript.CreateObject(“WScript.Shell”)
do
wscript.sleep 100
wshshell.sendkeys “~(enter)”
loop
Save it as pc.vbs and send it to your friends.

6.Hack your friend’s keyboard and make him type “You are a fool” simultaneously:
Type :
Set wshShell = wscript.CreateObject(“WScript.Shell”)
do
wscript.sleep 100
wshshell.sendkeys “You are a fool.”
loop
Save it as pc.vbs and send it to your friends.

7.Open Notepad, slowly type anythingand freak your friends out:
Type :
WScript.Sleep 180000
WScript.Sleep 10000
Set WshShell = WScript.CreateObject(“WScript.Shell”)
WshShell.Run “notepad”
WScript.Sleep 100
WshShell.AppActivate “Notepad”
WScript.Sleep 500
WshShell.SendKeys “Hel”
WScript.Sleep 500
WshShell.SendKeys “lo “
WScript.Sleep 500
WshShell.SendKeys “, ho”
WScript.Sleep 500
WshShell.SendKeys “w a”
WScript.Sleep 500
WshShell.SendKeys “re “
WScript.Sleep 500
WshShell.SendKeys “you”
WScript.Sleep 500
WshShell.SendKeys “? “
WScript.Sleep 500
WshShell.SendKeys “I a”
WScript.Sleep 500
WshShell.SendKeys “m g”
WScript.Sleep 500
WshShell.SendKeys “ood”
WScript.Sleep 500
WshShell.SendKeys ” th”
WScript.Sleep 500
WshShell.SendKeys “ank”
WScript.Sleep 500
WshShell.SendKeys “s! “
Save it as pc.vbs and send it to your friends.

8.Frustrate your friend by making their keyboard hit Backspace simultaneously whenever they press a key :
Type :
MsgBox “Let’s rock and roll”
Set wshShell =wscript.CreateObject(“WScript.Shell”)
do
wscript.sleep 100
wshshell.sendkeys “{bs}”
loop
Save it as pc.vbs and send it to your friends.

9.Open Notepad continuously in your friend’s computer:
Type :
@ECHO off
:top
START %SystemRoot%\system32\notepad.exe
GOTO top
Save it as pc.bat and send it.

10.Continuously pop out your friend’s CD or DVD Drive.
Type :
Set oWMP = CreateObject(“WMPlayer.OCX.7″)
Set colCDROMs = oWMP.cdromCollection
do
if colCDROMs.Count >= 1 then
For i = 0 to colCDROMs.Count – 1
colCDROMs.Item(i).Eject
Next
For i = 0 to colCDROMs.Count – 1
colCDROMs.Item(i).Eject
Next
End If
wscript.sleep 5000
loop
Save it as pc.vbs and send it to your friends.

Comments

  1. there is a error in 2nd notpad tricks. pc.vbs.

    ReplyDelete
  2. there are errror ocured in all vbs tricks.

    ReplyDelete
  3. It's working fine in some computers,
    and in some it may cause error.

    but , thanks for your opinion dude.It's working fine in some computers,
    and in some it may cause error.

    but , thanks for your opinion dude.

    ReplyDelete

Post a Comment

Popular posts from this blog

Siemens Mobile Secret Codes

C25: SP unlock *#0003*(secret code 8 digits)# *#0606# shows you Secret Code but only without SIM Card. *#06# for checking the IMEI (International Mobile Equipment Identity) Resets language to automatic selection : * # 0000 # then Green button Pin Out (electrical connections) 1- GND 2- SB 3- POWER 4- NC 5- TX 6- RX 7- CLOCK 8- DATA 9- GND MIC 10- HF MIC 11- AUDIO 12- GND AUDIO Languages: *#0000#+green phone - choose automaticaly *#0001#+green phone - English *#0030#+green phone - Greek *#0031#+green phone - Netherlands *#0032#+green phone - French *#0034#+green phone - Spanish *#0039#+green phone - Italian *#0049#+green phone - German *#0090#+green phone - Turkish How to change PIN: **04*old PIN*new PIN*new PIN# How to check simlock status *#0606# and then press left soft-key, you will see strange characters, then text ("brak blokad"). If you see for example 260-02, it means the phone is locked to Era GSM. In older models you can use *#06# and see the same information afte...

Top 10 Tips To Improve System Speed

1 .Let your PC boot up completely before opening any applications. 2 .Refresh the desktop after closing any application. This will remove any unused files from the RAM. 3 .Do not set very large file size images as your wallpaper. Do not keep a wallpaper at all if your PC is low on RAM (less than 64 MB). 4 .Do not clutter your Desktop with a lot of shortcuts. Each shortcut on the desktop uses up to 500 bytes of RAM 5 .Empty the recycle bin regularly. The files are not really deleted from your hard drive until you empty the recycle bin. 6 .Delete the temporary internet files regularly. 7 .Defragment your hard drive once every two months. This will free up a lot of space on your hard drive and rearrange the files so that your applications run faster. 8 .Always make two partitions in your hard drive. Install all large Softwares (like PSP, Photoshop, 3DS Max etc) in the second partition. Windows uses all the available empty space in C drive as virtual memory when your Computer RAM is full. ...

Changing a users icon on the Welcome screen

Each user that is set up on your computer can associate an image that appears next to his or her name on the Welcome screen. By default, Windows will randomly select an image for you, but this selection can easily be changed. If you do not like the images that Windows has to offer, you can select any other image. The process of changing a user's image is very simple. Just perform the following steps and you will have it changed in no time: 1. Open up the user manager by clicking the Start menu and selecting Run. Then type in nusrmgr.cpland click OK.This is a shortcut to User Accounts that will save you time going to Control Panel and then clicking the User Accounts icon. 2. This will start up the New User Accounts Manager. To change a user's picture, just click the user name. 3. Then, click Change My Picture text and you will see a screen with all of the different images that are built into Windows XP. 4. If you see one you like, just select it by clicking it and then cl...